The Emjoi Micro-Pedi is a safe, portable, professional-at-home pedicure system that can be used on all areas of your feet and heels to easily remove rough, calloused, hard, dry and cracked skin safely and instantly. The Micro-Pedi will leave ...
1. Wash and clean the skin and dry fully.2. Select Micro-Mineral roller (blue for extra course, pink for course) and place into the unit.3. Remove the protective cover and your MICRO Pedi us ready to use.4. Turn on the unit and gently rotate (back and forth or side to side) over the hard skin for 2-3 seconds. Do not press hard, or the unit will stop. Turn off and check if you have achieved the softness you desire. If not, turn on and repeat until level of smoothness is obtained. 5. Turn the unit off. Wipe or rinse feet to remove excess dead skin particles. 6. Keep the protective cover on your unit when it is not in use. Cleaning: The Emjoi MICRO Pedi is water resistant. It can be rinsed under water to clean but is not waterproof. Do not submerge under water as this may cause defects to the unit. MICRO Pedi Micro-Mineral rollers should not be placed into water.1. Turn the unit off.2. Remove the protective cover and roller from the MICRO Pedi unit.3. Rinse the unit head under the tap for 5-8 seconds. Wipe the body of the unit with a clean dry cloth.4. Replace the protective cover.
Do not use in the same place for more than 2-3 seconds at a time. Stop if skin becomes sore or inflamed. MICRO Pedi Micro-Mineral rollers that are broken or worn could cause damage to the skin. Rollers last for multiple sessions depending on the frequency of use and the size of area being treated. Replace the Emjoi MICRO Pedi Micro-Mineral roller when you find defects or find them less effective.